AUTOXBERT Car Daytime Running Light Strip, 2Pcs Flexible Crystal DRL LED Strip Sequential, Dual Color 17Inch Headlight LED Strip Turn Signal Lights Strip (White&Amber)

These are GREAT! And really add a cool look to my car. Plus then start up sequence is really dope. Tho. Be careful when cutting off lights. I did cut one off the end of each. To better fit. And they started turning yellow. I think water got in? The very last ones don’t work now. Sadness.

Great product i.bought other i sidnt like these one work.perfit

These are interesting add-on DRL/signal lights. They're made with a flexible PCB, using individual clear plastic reflectors over each LED segment. Each segment consists of 6 LEDs, 3 white and 3 amber. The entire assembly is contained within a clear heat shrink tubing, both ends filled with silicone for limiting liquid ingress. Everything else (connectors and drivers) are not water resistant at all.They work as described in the product information, with the signal markers flowing in one direction when activated. The DRL LEDs turn off during signal operation, then come back on a few seconds after signal operation stops.My concerns with this product are as follows:1. The reflectors have alignment pins that protrude through the flexible LED pcb. These pins are small and therefore a bit poky. I can see them wearing through the clear heat shrink tubing after a while due to vibrations (you can easily feel the pins through the heat shrink right out of the box).2. While the PCB is flexible in the forward and backward direction, it's not all too flexible up and down. When flexed either up or down, the PCB starts to kink.3. Attachment is via double-sided foam tape. This would be fine if you didn't have the alignment pins sticking out the back, as well as an unmarked 8 pin SMD chip on the PCB backside. This reduces the foam tape coverage on the backside of the light strip to about 30%. Replacing the included foam tape with a high-quality and thicker foam tape would be recommended.4. While the lights themselves are fairly well protected from water, nothing else is. You'll need to find a way to protect the JST connectors and control boxes from water ingress. The control box PCB is not conformal coated.Some mounting considerations are required. We'll give them a go and see how it turns out.

Very good

Fairly bright for $20 lights. I installed these on the inside of my headlight housings. But the biggest thing I bought them for was for the sweeping action they do on start up like it shows in the video. These do not do it at all. They just come full on and that's it. Very disappointed, spent a couple hours to install them where I want them and they don't work like they are supposed to. Sequential blinker does not line up with the blink sequence of the stock blinker like my other products I've bought. They have their own timing and just make it look weird like your blinkers are out of sync. Would not buy again.

Ami carro le quedaron perfectas

The media could not be loaded. Very bright LEDS, I custom cut them and installed inside a stock Suzuki sv1000 headlight and wired into the turn signals/running light. Makes it very easy to be seen, great product for its price, no shorts on installation, waterproof. Gave my bike a modern look and function.

Llega muy rápido. Espero funcione bien. Se ve excelente